They do give you a second fan bracket, but I didn't see any improvement in cooling performance with a push-pull configuration. The thermal compound included is decent, but for high voltages/OC I would recommend something better. Note that access to the rear of the motherboard is required to mount the backplate, so depending on your case configuration removing the motherboard may be required. ![]() Mounting isn't as easy as some other aftermarket coolers out there, but it's totally manageable. However, under normal loads the fan is quiet, and still delivers sufficient airflow to cool my CPU. It tends to generate a howling sound above 80%. Noise levels are a bit high when the fan nears maximum speed. I5-4690K3,7ghz (stock speed) with CM Hyper 212 Evo, temperatures after running aida64 extreme about 5 minutes. ![]() My ambient room temperature is generally around 26C. First thing you need to take care is good enough processor cooler, i’m using Cooler Master Hyper 212 Evo air cooler ’cause it is cheap and it can handle overclocks pretty well. Load temperatures in games and normal programs are around 65C max, while synthetic stress testing will see around 75C. Temperatures are pretty good, I'm pushing 1.250V through my i5 4670K to maintain 4.3GHz (I got a below average chip). I've found that the EVO outperforms the more recent versions of the 212, such as the 212 Black Edition. ![]() This has been my go-to aftermarket cooler even after all these years.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |